| Home | E-Submission | Sitemap | Login | Contact Us |  
J. Korean Ceram. Soc. > Volume 44(12); 2007 > Article
Journal of the Korean Ceramic Society 2007;44(12): 733.
doi: https://doi.org/10.4191/kcers.2007.44.1.733
Spin-coating 공정에 의해 제조된 음극 지지형 고체산화물 연료전지
유지행, 이희락, 우상국
한국에너지기술연구원 융합복합재료연구센터
Anode-supported Solid Oxide Fuel Cells Prepared by Spin-coating
Ji-Haeng Yu, Hee-Lak Lee, Sang-Kuk Woo
Convergence Energy Materials Research Center, Korea Institute of Energy Research
NiO-YSZ anode-supported single cell was prepared by spin-coating YSZ and LSM slurries as electrolyte and cathode, respectively. Dense YSZ electrolyte film was successfully prepared on the porous NiO-YSZ anode substrate by tuning pre-sintering temperature of NiO-YSZ and co-firing temperature. The thickness of YSZ film was controlled by the solid content of slurry and coating cycles. The experimental conditions affecting on the thickness of YSZ film was discussed. Single cells with the active electrode area ${sim}0.8;cm^2$ were prepared by spin-coating the cathode layers of LSM-YSZ mixture and LSM consequently as well. The effects of the pre-sintering temperature and thus the microstructure of NiO-YSZ substrate on the current-voltage characteristics of co-fired cell were investigated.
Key words: SOFC, Fabrication, Slurry, Spin-coating, Cell performance
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society.                      Developed in M2PI