| Home | E-Submission | Sitemap | Login | Contact Us |  
J. Korean Ceram. Soc. > Volume 50(6); 2013 > Article
Journal of the Korean Ceramic Society 2013;50(6): 466.
doi: https://doi.org/10.4191/kcers.2013.50.6.466
Electrospinning법으로 제조된 PZT 섬유의 구조분석 및 특성평가
박춘길, 윤지선, 정영훈, 남중희, 조정호, 백종후, 정대용1
한국세라믹기술원 전자소재융합본부
1인하대학교 신소재공학과
Structural Analysis and Characterization of PZT Fiber Fabricated by Electrospinning
Chun Kil Park, Ji Sun Yun, Young Hun Jeong, Joong-Hee Nam, Jeong Ho Cho, Jong-Hoo Paik, Dae Young Jeong1
Electronic Materials Convergence Division, Korea Institute of Ceramic Engineering and Technology
1Korea Department of materials Science and Engineering, In-ha University
Currently, piezoelectric ceramics are being applied in various fields, such as ultrasonic sensors, vibration devices, sound filters, and various energy conversion devices. Flexible piezoelectric ceramics are widely studied in an effort to mitigate the disadvantages of their brittle and inductile properties. Structural damage to piezoelectric fibers is much less than that to thin films when piezoelectric fibers are twisted or bent. Therefore, stretchable devices can be fabricated if piezoelectric fibers are obtained using an elongated substrate. In this study, sintering processes of PZT ($Pb(Zr_{0.53}Ti_{0.47})O_3$) fibers prepared by electrospinning were optimized through the TGA and XRD analyses. The crystal structure and microstructure of the piezoelectric fibers were investigated by XRD, FE-SEM and TEM.
Key words: PZT, Electrospinning, Nanofibers
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society.                      Developed in M2PI