| Home | E-Submission | Sitemap | Login | Contact Us |  
J. Korean Ceram. Soc. > Volume 42(2); 2005 > Article
Journal of the Korean Ceramic Society 2005;42(2): 117.
doi: https://doi.org/10.4191/kcers.2005.42.2.117
EB-PVD법에 의해 제조된 YSZ 전해질의 전기적 특성
신태호, 유지행1, 이시우1, 한인섭1, 우상국1, 현상훈
연세대학교 세라믹공학과
1한국에너지기술연구원 에너지재료연구센터
Electrical Properties of YSZ Electrolyte Film Prepared by Electron Beam PVD
Tae-Ho Shin, Ji-Haeng Yu1, Shiwoo Lee1, In-Sub Han1, Sang-Kuk Woo1, Sang-Hoon Hyun
Department of Ceramic Engineering, Yonsei University
1Energy Materials Research Center, Korea Institute of Energy Research
Electron Beam Physical Vapor Deposition (EB-PVD) is a typical technology for thermal barrier coating with Yttria Stabilized Zirconia (YSZ) on aero gas turbine engine. In this study EB-PVD method was used to fabricate dense YSZ film on NiO-YSZ as a electrolyte of Solid Oxide Fuel Cell (SOFC). Dense YSZ films of -10 $mu$m thickness showed nano surface structure depending on deposition temperature. Electrical conductivities of YSZ film and electric power density of the single cell were evaluated after screen- printing $LaSrCoO_3$ as a cathode.
Key words: Solid electrolyte, YSZ film, EB-PVD, Electrical conductivity, SOFC
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society.                      Developed in M2PI