| 폐도자기를 골재로 이용한 콘크리트의 특성 |
| 강성구, 이완조, 황인동1, 박성, 정윤중 |
명지대학교 세라믹공학과
1세일콘(주) 부설연구소 |
| Properties of Concrete Using Waste Pottery and Porcelain as Aggregates |
| Sung-Gu Kang, Wan-Jo Lee, In-Dong Hwang1, Sung Park, Yun-Joong Chung |
Department of Ceramic Engineering, Myongji University
1R&D Center, Seil Con Co. Ltd. |
|
|
|
|
|
| ABSTRACT |
|
Nowadays, large amount of waste pottery and porcelain annually are produced. It is needed that they are used as recycled materials in order to prevent environmental pollution and gain economic profits. Therefore, the purpose of this study is to present the method of utilizing the recycled aggregates that are obtained from waste pottery and porcelain as the concrete aggregate. The qualities of the recycled aggregate were compared with those of the crushed aggregate through measuring their physical properties. The test results showed that the replacement of crushed aggregate by recycled aggregate at the levels $10%,;20%$, and $30%$ had little effect on the compressive strength of the concretes, but higher levels of replacement reduced the compressive strength. Increment of the replacement of recycled aggregate caused increase in absorption ratio. As a conclusion, norman strength recycled aggregate concretes can be produced using less than $30%$ of recycled aggregate. |
| Key words:
Waste pottery and porcelain, Recycled aggregate, Compressive strength |
|
|
|
PDF Links
Full text via DOI
Download Citation 
