| Home | E-Submission | Sitemap | Login | Contact Us |  
J. Korean Ceram. Soc. > Volume 41(7); 2004 > Article
Journal of the Korean Ceramic Society 2004;41(7): 513.
doi: https://doi.org/10.4191/kcers.2004.41.7.513
열가소성 고분자를 이용한 다공질 알루미나의 제조
이상진, 김해두
한국기계연구원 세라믹재료그룹
Fabrication of Porous Al2O3 Ceramics Using Thermoplastic Polymer
Porous alumina ceramics with aligned plate-shaped pores were fabricated by using thermoplastic microsphere in order to show the anisotropy in thermal conductivity. The mixed powder of alumina and microsphere was pressed under 15 MPa till 20$0^{circ}C$ to deform polymer into platelet-shape and sintered at 1,00$0^{circ}C$ for 1 h. The sintered specimen with 10 wt% microsphere has 45.3% porosity and the bending strength of 44 MPa. The microstructural investigation confirmed the pore structure of platelet-shape, the thermal conductivities for vertical and parallel directions are 3.803 W/mK and 7.818 W/mK, respectively, the ratio between two directions exceeds 2.ꤠ돀遠잖⨀塨
Key words: Porous alumina, Plate-shaped pore, Anisotropy in thermal conductivity, Microsphere
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society. All rights reserved.                      Developed in M2PI