|
|
|
Journal of the Korean Ceramic Society 2000;37(8): 760. |
| 콘크리트 발수제용 Silane의 유화 |
| 황인동, 염희남1, 정윤중2 |
(주)세일콘 부설연구소
1기술표준원 무기화학과
2명지대학교 세라믹공학과 |
| The Emulsification of Silane as Water REpellent for Concrete |
|
|
|
|
|
|
|
| ABSTRACT |
|
Recently, the protection of construction is demanded with environmental pollution. These protect modes are use of concrete admixture, coat of protective polymer and impregnate of surface with chemicals etc. The most widely used impregnation is economical and effective. The define of Impregnation for construction protect is reacted in and consolidated substrate after absorbed. The impregnation agents are Polyesters, Acrylic monomers, Epoxy and Silicone derivatives. Commonly, because the Silane has good water repellency and environmental advantages that it widely used to water proofing agents, dampproofing agents and absorption reducer for concrete of bridges. When application of Silane, it occurs pollution and harmfulness as included organic solvent. The manufactures have tired to emulsification of Silane for the reducing of the defects. The Silane emulsion is vary unstable and does not stored long periods, and it is diminished in good properties with internal reaction. In this study we tried to emulsification of Silane for effectiveness improvement and reduce pollution and hazard and discussed properties variation of emulsion. The Silane emulsions are achieved emulsifying with W/O and O/W type surfactants. It used 0.24% PVA as protective colloid and stable phase is creamy. The creamy Silane emulsion performance as the penetration depth and water absorption rate are above 4 mm and below 0.1. It stable about 6 month at room temperature. |
| Key words:
Silane, Emalsion, Water repellent, Impregnation |
|
|
|
PDF Links
Full text via DOI 
Download Citation 
