| Home | E-Submission | Sitemap | Login | Contact Us |  
top_img
J. Korean Ceram. Soc. > Volume 36(12); 1999 > Article
Journal of the Korean Ceramic Society 1999;36(12): 1296.
뮬라이트 결합 알루미나 캐스터블의 제조와 특성
천승호, 황규홍1, 전병세2
경남대학교 신소재공학부
1경상대학교 무기재료공학과
2경남대학교신소재공학부
Preparation and Properties of Mullite Bonded Alumina Castable
ABSTRACT
In the preparation of a high alumina castable by the vibration casting method. the addition of microsilica (3.0wt%) as a deflocculant reduced water contents and enhanced flow value of castable. An additional addition of alumina cement (3.0wt%) led to an coagulation effect. Alumina fine particles (7.5wt%) were added to form mullite phase in matrix during heat treatment. Alumina cement used as binder induced liquid phase of silica at low temperature and the liquid phase of silica transformed into the mullite phase by the reaction with alumina fine particles. The activation energy for transforming mullite phase was 19.87kcal/mol. Compressive strength and modulus of rupture of the alumina castable were 900-1000kg/cm2 and 200-300kg/cm2 respectively. The resistance against corrosion of slag (15.71%) was improved comparing with conventional alumina castable
Key words: Microsilica, Alumina cement, Alumina, Flow value, Mullite
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society. All rights reserved.                      Developed in M2PI