| Home | E-Submission | Sitemap | Login | Contact Us |  
J. Korean Ceram. Soc. > Volume 35(7); 1998 > Article
Journal of the Korean Ceramic Society 1998;35(7): 691.
계면유도 침전법에 의한 알루미나 및 이트리아 코팅 탄화규소 분말의 제조
엄기영, 김환, 이종국1, 임헌진2
서울대학교 공과대학 재료공학부
1조선대학교 공과대학 재료공학과
2요업기술원 정밀요업과
Preparation of Alumina and Yttria-Coated SiC Powder by the Surfaced-induced Precipitation Method
To obtain homogeneously mixed powders and minimize the amount of sintering aids in the liquid-phase sintering of SiC alumina and yttria-coated SiC powder was prepared by a surface-induced precipitation method. After a well dispersion of SiC powders in the aqueous solution of {{{{ { { {Al }_{2 }(SO }_{4 }) }_{3 } }} and {{{{ { { {Y }_{2 }(SO }_{4 }) }_{3 } }} the mixed precursors of aluminum hydroxide aluminum carbonate yttrium hydroxide and yttrium carbonate were precipitated on the surfaces of SiC particles through the hydrolysis reaction of urea. SiC powders coated with alumina yttria and their compounds were obtained by the calcination of SiC powders coated by oxides precursors and the thinckess of coated layer increased with increasing the concentration of aqueous metal basic solution
Key words: Alumina and yttria-coated SiC powder, Sintering aids, Surface-induced precipitation
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society.                      Developed in M2PI