| Home | E-Submission | Sitemap | Login | Contact Us |  
J. Korean Ceram. Soc. > Volume 55(5); 2018 > Article
Kim and Bang: Fabrication of Visible-Light Sensitized ZnTe/ZnSe (Core/Shell) Type-II Quantum Dots


Colloidal semiconductor quantum dots (QDs), because of the novel optical and electrical properties that stem from their three-dimensional confinement, have attracted great interest for their potential applications in such fields as bio-imaging, display, and opto-electronics. However, many semiconductors that can be exploited for QD applications contain toxic elements. Herein, we synthesized non-toxic ZnTe/ZnSe (core/shell) type-II QDs by pyrolysis method. Because of the unique type-II character of these QDs, their emission can range over an extended wavelength regime, showing photoluminescence (PL) from 450 nm to 580 nm. By optimizing the ZnSe shell growth condition, resulting ZnTe/ZnSe type-II QDs shows PL quantum yield up to ~ 25% with 35 nm PL bandwidth. Using a simple two step cation exchange reaction, we also fabricated ZnTe/ZnSe type-II QDs with absorption extended over the whole visible region. The visible-light sensitized heavy metal free ZnTe/ZnSe type-II QDs can be relevant for opto-electronic applications such as displays, light emitting diodes, and bio-imaging probes.

1. Introduction

Colloidal quantum dots (QDs) possess unique optical properties such as broad absorption with narrow emission features and tunabilily of size effect.1,2) Furthermore, the photochemical stability and durability of quantum dots make them an ideal material for selective targeting and solution preparation because their surface can accommodate various molecular sieves. Many experiments are underway, and applications in development, in the display,3) solar cell,4) photo-detector,5) as well as bio-sensor6) and imaging-probe applications.7,8) By controlling the size, any class of Cd QDs, in particular CdSe QDs, can be utilized to produce high luminescent light efficiency in a wide range of the visible light spectrum. These QDs also show a narrow photoluminescence (PL) features. Yet, their stability has attracted attention, making this a novel light emitting material.9,10) However, the toxicity of Cd limits immediate application in various fields. Accordingly, A class of nontoxic QDs with containing In, in particular InP QDs, was studied.11,12) Unfortunately, group III-V materials form more ionic bond characteristics, which makes it difficult to control the size in comparison to the cases of groups II-VI. In addition, the relatively wide band-width brings many restrictions in display and multi-functional molecular imaging.11,12)
The difference of energy level between heterogenous materials of group II-VI ZnTe and ZnSe in type-II ZnTe/ZnSe (core/shell) quantum dots have excited electrons at the conduction band of ZnSe and holes located at the valence electron band of ZnTe, forming a type-II heterostructure.13) The effective band gap of this structure becomes narrower than that of ZnSe and ZnTe, extended PL peak over visible spectral range. However, the conventional heterostructure of ZnTe/ZnSe quantum dots poses a difficulty in mass production because the use of a highly reactive precursor such as diethylzinc is needed, which limits the control of the growth speed.
This paper attempts to control various precursors to produce a composite of ZnTe/ZnSe (core/shell) type-II QDs that has bright PL characteristics in the visible light spectrum and ZnTe/ZnSe quantum dots that have a narrow PL bandwidth. Furthermore, we show a composite product of ZnTe/ZnSe (core/shell) type-II quantum dots that absorbs whole visible spectral range via cation exchange reaction.

2. Experimental Procedure

2.1. Reagent

The following reagents are used in the experiment: diethylzinc solution (1.0 M in hexanes, Aldrich), hexadecylamine (HDA, 98%, Aldrich), 1-octadecene (ODE, 90%, Aldrich), tellurium powder (Te, 99.997%, Aldrich), selenium powder (Se, 99.99%, Aldrich), zinc acetate (Zn(Ac)2, 99.99%, Aldrich), zinc chloride (ZnCl2, 99.999%, Aldrich), oleic acid (OA, 90%, Sigma-Aldrich), oleylamine (70%, Aldrich), trioctylphosphine (TOP, 97%, Strem), cadmium acetate dihydrate (98%, Sigma-Aldrich), tetradecyl phosphonic acid (TDPA, 97%, Aldrich), and tetrakis (acetonitrile) copper (I) hexafluorophosphate ([Cu(CH3CN)4]PF6, 97%, Aldrich).

2.2. ZnTe core QD

TOP-Te precursor was prepared in a glove box in which Te was melted to 0.5 M in TOP. Then, 2.5 g of HDA and 7 ml of ODE were heat treated for an hour in vacuum. The environment was then fixed with nitrogen. After heat treatment, at up to 150°C, a mixed solution of diethylzinc and TOP-Te was quickly injected and stirred with heat for 20 minutes at 250°C.

2.3. ZnTe/ZnSe core/shell QDs

2.3.1. Composite production with use of diethylzinc precursor

The work used the SILAR14) coating approach method as the basis of ZnTe/ZnSe core/shell QDs. First, for the preparation of TOP-Se precursor, Se was melted to 0.5 M in TOP inside a glove box. Then, ZnTe QDs prepared in 2.2 were combined with diethylzinc precursor and TOP-Se precursor, with increase of temperature from 170°C to 300°C. The temperature was increased with mixed insertion at every shell level and ZnSe shell levels were laminated. Finally, a large volume of ethanol was introduced to quantum dot solution to produce a precipitate, which was then dispersed with hexane later.

2.3.2. Composite production with use of Zinc oleate precursor

Zinc oleate precursor was produced using Zn(Ac)2 mmol, OA mmol, and ODE ml. First, Zn(Ac)2 mmol, OA mmol and ODE ml were heated for 1 h in a vacuum incubator at 110°C. Then, solutions were left in nitrogen environment under 200°C for an hour for reaction to take place. After that, injection similar to that shown in 2.3 (1) was done, but instead of diethylzinc, zinc oleate precursor was injected.

2.3.3. Composite production with use of Zinc chloride precursor

Zinc chloride precursor was produced using ZnCl2 4mmol, Oleylamine 7.2 ml and ODE 12.8 ml. These solutions were put under 110°C of vacuum for an hour with heat exchange. After that, solutions were introduced to nitrogen environment for an hour under 200°C to prepare zinc chloride precursor. As in 2.3 (1), zinc chloride precursor was injected instead of diethylzinc.

2.3.4. Cation exchange

Synthesis of CdTe/CdSe (core/shell) QDs

cadmium acetate dihydrate 0.4 mmol, TDPA 0.9 mmol and ODE 4 ml were heat stirred under 110°C in vacuum for an hour. Then, the environment was changed to nitrogen and the temperature was increased to room temperature, at which point Oleylamine 2 ml and ODE 20 ml were injected. Solutions were again heated to 300°C to prepare Cd precursor. TOP-Te 0.2 mmol was injected into CD precursor to produce CdTe nuclear quantum dot composite. Then, a large volume of ethanol was introduced to create quantum dot precipitate. After the precipitate was produced, a mix of ODE 15 ml and oleylamine 5 ml was heat stirred under 110°C in vacuum for an hour. After injection, CdTe/CdSe with a CdSe shell layer grown on the surface of CdTe nuclei was synthesized in an incubator under heat treatment.

Cu2Te/Cu2Se Cation exchange reaction

Cu precursor was prepared using Cu(CH3CN)4]PF6 in 3 ml of methanol. The composite of CdTe/CdSe from above was dispersed using toluene and injected into Cu precursor. Mixtures were stirred at room temperature for 5 minutes for cation exchange. The exchanged nano crystals were purified using methanol and then introduced into TOP.

ZnTe/ZnSe cation exchange reaction

ZnCl2 4 mmol, ODE 8 ml and olelyamine 6 ml were heat treated in a vacuum for an hour at 110°C. Solutions were again heated to 250°C after moving to a nitrogen environment. Then, mixture of Cu2Te/Cu2Se from above was injected and heat treated from 5 to 20 minutes to allow cation exchange to take place.

3. Results and Discussion

A composite of ZnTe core QDs can be made by quickly injecting high temperature ODE solvent that contains hexadecylamine surfactant and TOP-Te precursor. The highly reactive diethylzinc will induce the formation of a nucleus and its growth in a reactive vessel under high temperature will produce a uniformal size of ZnTe core quantum dots. The Zn:Te ratio that allows for uniformal size production of ZnTe quantum dots is 1 : 1 and not 1 : 2 (Fig. 1). The use of a 1 : 1 ratio of Zn:Te quantum dot showed a sharp 1st exciton absorption peak. A ZnTe composite prepared in 1 : 1 ratio of Zn and Te precursor shows an absorption peak at about 430 nm, but no fluorescence. This is due to surface defects of ZnTe QDs, which suppress radiation emission.
ZnTe/ZnSe (core/shell) QDs are made using SILAR (Successive Ionic Layer Adsorption and Reaction) with Zn and Se precursors in a reactive vessel to grow ZnSe shell layers. TOP-Se is used as the Se precursor. Also, Zn precursor is made using either diethylzinc, zinc oleate or zinc chloride to induce ZnSe shell layer growth. Fig. 2 shows the optical characteristics of different QDs that use Zn precursor in the reaction.
As can be seen in Fig. 2(a), the red shifted absorption profile of the ZnTe core QDs is barely visible during diethylzinc and TOP-Se cross injection. ZnSe shell layer growth is not observed either. It is expected that diethylzinc is oxidized before it is injected into the TOP-Se reactive vessel, producing a layer of oxidation during the SILAR coating process instead of leading to ZnSe shell layer growth on the surface of ZnTe. Furthermore, after injecting Zn and Se precursors, a weak yet broad emission is observed near ~ 600 nm of the wave range. We believe this trap emission is due to a formation of an oxidative layer on the surface of ZnTe quantum dots.15) Although the diethylzinc precursor is reactive, Fig. 2(a) shows that it is not an adequate precursor for ZnSe shell growth when using the SILAR coating method.
When using a Zn precursor of zinc ion coordinated to a carboxylate group, as in zinc-oleate (Fig. 2(b)) or zinc chloride (Fig. 2(c)), progressive red shifted absoption and PL spectra are observed during the continuous SILAR coating method. This is due to the thickening of the ZnSe shell, which lowers the energy in the conduction band of ZnSe and narrows the effective band gap of the ZnTe/ZnSe (core/shell) QDs.
Furthermore, as the thickness of the ZnSe shell layer increases, the spatial overlap between electron and hole decreases, and the 1st exciton absorption peak gradually becomes featureless.13) Not only the red-shifted PL feature as the ZnSe shell layer of the ZnTe/ZnSe (core/shell) QDs grows, but the ZnSe layers allow passivation of the surface of ZnTe QDs. Furthermore, overlap integral between photo-excited charge carrier and surface trapped carrier is reduced, resulting in improved fluorescent efficiency and stability. ZnTe QDs were coated with SILAR coating six times to produce a composite of ZnTe/ZnSe (core/shell) QDs. Using the Zn-oleate precursor to coat the ZnSe shell produced 12% of PL efficiency, showing a PL band-width at 40 nm. Using ZnCl2 to coat the ZnSe shell produced 25% PL efficiency with PL band-width at 35 nm. This PL efficiency is an improvement compared to previous studies,13) where ZnTe QDs were introduced to diethylzinc and TOP-Se to increase ZnSe shell layers for the final product of ZnTe/ZnSe QDs. The use of a stable Zn precursor, along with SILAR coating of the ZnTe nucleus, allowed for uniform shell growth of ZnSe.14,16) Also, using ZnCl2 instead of Zn-oleate improved the PL efficiency because chloride ion allows for passivation on the surfaces of groups II-VI nanoparticles, eliminating trap sites and thereby increasing the stability.17,18) Therefore, it is believed that ZnCl2 precursor allows not only for ZnSe shell growth but also for surface passivation, which increases PL efficiency.
In order to accurately represent color in the latest display models, the application of non-toxic quantum dots in the visible light spectrum is becoming crucial and requires a material with very narrow PL band-width.19) This paper attempted to compare the characteristics of a new composite of ZnTe/ZnSe (core/shell) QDs fluorescent with those of a composite of nontoxic InP/ZnSe (core/shell).20,21) First, InP/ZnSe has limited display applications because it is in groups III-V, in which quantum dots have a wide PL band-width. 20,21) As can be seen in Fig. 3, green emitting InP/ZnSe QDs have a band-width at 52 nm. However, the composite produced in this study, ZnTe/ZnSe (core/shell) QDs, has a narrower PL band-width in the same PL peak region. It was observed that, in comparison to InP based composite, the ZnTe/ZnSe (core/shell) composite can be used to better represent true colors.
Figure 2 shows the ZnTe/ZnSe (core/shell) quantum dot effective band gap to have more extend to red color as the ZnSe shell layers thickens. However, there are limitations in absorbing/emitting in ranges beyond than 600 nm. It is conjectured that this phenomenon occurs because perhaps ZnTe and ZnSe have a large lattice mismatch (7.1%) that limits ZnSe shell layer growth. Producing a ZnTe/ZnSe (core/shell) QDs that responds to the red emitting was necessary. A 6.0 nm sized type-II CdTe/CdSe (core/shell) quantum dot22) was utilized and underwent sequential cation exchange of Cd2+ → Cu+/Cu+ → Zn2+.23) Fig. 4 shows the large size of the ZnTe/ZnSe (core/shell) QD product. Figs. 4(a) represents TEM images of starting CdTe/CdSe (core/shell) QDs and the corresponding ZnTe/ZnSe (core/shell) QDs obtained via cation exchange. The CdTe/CdSe (core/shell) QDs had an average size of 6.0 nm, but the size decreased to an average of 5.6 nm after the cation exchange reaction. The QDs did keep their spherical shape. The average particle size decreased by 6.7% because the lattice constant of Zn-chalcogenide is smaller than that of Cd-chalcogenide lattice when the exchange from Cd to Zn shrinks the lattice (‘CdTe with ZnTe’ and ‘CdSe with ZnSe’ lattice mismatches are 5.9% and 6.7%, respectively). Absorption onset can be observed at 680 nm for the 6.0 nm size CdTe/CdSe (core/shell) quantum dots. On the other hand, the 5.6 nm sized ZnTe/ZnSe (nucleus/shell) quantum dots after cation exchange show absorption onset at 620 nm (Fig. 4(b)). Zn-chalcogenize has a wider band gap than that of Cd-chalcogenide, and thereby has bluish absorption. Fig. 4(c) shows XPS analysis of Cd and Cu ions are replaced by Zn ions after cation exchange of ZnTe/ZnSe (core/shell) QDs. It was confirmed that synthesizing ZnTe/ZnSe (nucleus/shell) quantum dots that respond to over 600 nm long waves was possible by performing cation exchange to form similarsized CdTe/CdSe (core/shell) QDs.

4. Conclusions

In this work, we synthesized a composite of ZnTe/ZnSe (core/shell) type-II QDs that absorbs and emits visible light. ZnTe core QDs were synthesized via high temperature thermal decomposition to maximize the ZnSe shell layer and create visible light-emitting ZnTe/ZnSe (core/shell) type-II quantum dots that have a maximum 25% PL efficiency with half-width of 35 nm. Through further study, ZnTe/ZnSe (core/shell) type-II QDs that can absorb the entire visible light spectrum, using large CdTe/CdSe (core/shell) type-II QDs with two-step cation exchange reaction, were obtained. These environmentally friendly quantum dots that absorb and emit visible light are expected to be utilized in the field of highly efficient photovoltaic and in high definition display materials.


This research was supported by the Policy Research Project of the Korea Institute of Ceramic Engineering and Technology (KPP_18005).

Fig. 1
Absorption spectra of ZnTe QDs with 1 : 1 (black) and 1 : 2 (red) molar ratio of Zn and Te.
Fig. 2
Absorption (left panel) and photoluminescence spectra (right panel) of ZnTe core and ZnTe/ZnSe (core/shell) QDs with (a) diethylzinc, (b) zinc-oleate, and (c) zinc chloride as zinc precursor for ZnSe shell growth.
Fig. 3
Comparison of (a) absorption and (b) photoluminescence spectra of green emitting InP/ZnSe (core/shell) QDs (black) and ZnTe/ZnSe (core/shell) QDs (red).
Fig. 4
(a) TEM image and (b) optical absorption spectra of starting CdTe/CdSe (core/shell) QDs and corresponding ZnTe/ZnSe (core/shell) QDs obtained via cation exchange reaction. (c) XPS spectra of corresponding ZnTe/ZnSe (core/shell) QDs


1. MB. Jr, M. Moronne, P. Gin, S. Weiss, and AP. Alivisatos, “Semiconductor Nanocrystals as Fluorescent Biological Labels,” Science, 281 [5385] 2013-16 (1998).
2. J. Lee, VC. Sundar, JR. Heine, MG. Bawendi, and KF. Jensen, “Full Color Emission from II-VI Semiconductor Quantum Dot-Polymer Composites,” Adv Mater, 12 [15] 1102-05 (2000).
3. Y. Jiang, SY. Cho, and M. Shim, “Light-Emitting Diodes of Colloidal Quantum Dots and Nanorod Heterostructures for Future Emissive Displays,” J Mater Chem C, 6 [11] 2618-34 (2018).
4. R. Liu, BP. Bloom, DH. Waldeck, P. Zhang, and DN. Beratan, “Improving Solar Cell Performance Using Quantum Dot Triad Charge-Separation Engines,” J Phys Chem C, 122 [11] 5924-34 (2018).
5. KS. Cho, K. Heo, CW. Baik, JY. Choi, H. Jeong, S. Hwang, and SY. Lee, “Color-Selective Photodetection from Intermediate Colloidal Quantum Dots Buried in Amorphous-Oxide Semiconductors,” Nat Commun, 8 [1] 840(2017).
crossref pdf
6. PT. Snee, RC. Somers, G. Nair, JP. Zimmer, MG. Bawendi, and DG. Nocera, “A Ratiometric CdSe/ZnS Nanocrystal pH Sensor,” J Am Chem Soc, 128 [41] 13320-21 (2006).
7. TT. Xuan, JQ. Liu, CY. Yu, RJ. Xie, and HL. Li, “Facile Synthesis of Cadmium-Free Zn-In-S:Ag/ZnS Nanocrystals for Bio-Imaging,” Sci Rep, 6 24459(2016).
crossref pdf
8. X. Michalet, FF. Pinaud, LA. Bentolila, JM. Tsay, S. Doose, JJ. Li, G. Sundaresan, AM. Wu, SS. Gambhir, and S. Weiss, “Quantum Dots for Live Cells, in Vivo Imaging, and Diagnostics,” Science, 307 [5709] 538-44 (2005).
9. M. Danek, KF. Jensen, CB. Murray, and MG. Bawendi, “Synthesis of Luminescent Thin-Film CdSe/ZnSe Quantum Dot Composites Using CdSe Quantum Dots Passivated with an Overlayer of ZnSe,” Chem Mater, 8 [1] 173-80 (1996).
10. B. Xing, W. Li, X. Wang, H. Dou, L. Wang, K. Sun, X. He, J. Han, H. Xiao, J. Miao, and Y. Li, “Highly-Fluorescent Alloyed Quantum Dots of CdSe1-xTex Synthesized in Paraffin Liquid: Gradient Structure and Promising Bio-Application,” J Mater Chem, 20 [27] 5664-74 (2010).
11. E. Bang, Y. Choi, J. Cho, YH. Suh, HW. Ban, JS. Son, and J. Park, “Large-Scale Synthesis of Highly Luminescent InP@ZnS Quantum Dots Using Elemental Phosphorus Precursor,” Chem Mater, 29 [10] 4236-43 (2017).
12. S. Tamang, C. Lincheneau, Y. Hermans, S. Jeong, and P. Reiss, “Chemistry of InP Nanocrystal Syntheses,” Chem Mater, 28 [8] 2491-506 (2016).
13. J. Bang, J. Park, JH. Lee, N. Won, J. Nam, J. Lim, BY. Chang, HJ. Lee, B. Chon, J. Shin, JB. Park, JH. Choi, K. Cho, SM. Park, T. Joo, and S. Kim, “ZnTe/ZnSe (Core/Shell) Type-II Quantum Dots: their Optical and Photovoltaic Properties,” Chem Mater, 22 [1] 233-40 (2010).
14. Y. Chen, J. Vela, H. Htoon, JL. Casson, DJ. Werder, DA. Bussian, VI. Klimov, and JA. Hollingsworth, ““Giant” Multishell CdSe Nanocrystal Quantum Dots with Suppressed Blinking,” J Am Chem Soc, 130 [15] 5026-27 (2008).
15. WH. Zhang, JL. Shi, LZ. Wang, and DS. Yan, “Preparation and Characterization of ZnO Clusters inside Mesoporous Silica,” Chem Mater, 12 [5] 1408-13 (2000).
16. C. Lincheneau, M. Amelia, M. Oszajca, A. Boccia, F. D’Orazi, M. Madrigale, R. Zanoni, R. Mazzaro, L. Ortolani, V. Morandi, S. Silvi, K. Szaciłowski, and A. Credi, “Synthesis and Properties of ZnTe and ZnTe/ZnS Core/Shell Semiconductor Nanocrystals,” J Mater Chem C, 2 [6] 2877-86 (2014).
17. JY. Woo, JH. Ko, JH. Song, K. Kim, H. Choi, YH. Kim, DC. Lee, and S. Jeong, “Ultrastable PbSe Nanocrystal Quantum Dots via in Situ Formation of Atomically Thin Halide Adlayers on PbSe(100),” J Am Chem Soc, 136 [25] 8883-86 (2014).
18. RC. Page, D. Espinobarro-Velazquez, MA. Leontiadou, C. Smith, EA. Lewis, SJ. Haigh, C. Li, H. Radtke, A. Pengpad, F. Bondino, E. Magnano, I. Pis, WR. Flavell, P. O’Brien, and DJ. Binks, “Near-Unity Quantum Yields from Chloride Treated CdTe Colloidal Quantum Dots,” Small, 11 [13] 1548-54 (2015).
19. YC. Shih, and FG. Shi, “Quantum Dot Based Enhancement or Elimination of Color Filters for Liquid Crystal Display,” IEEE J Sel Top Quantum Electron, 23 [5] 1-4 (2017).
20. W. Shen, H. Tang, X. Yang, Z. Cao, T. Cheng, X. Wang, Z. Tan, J. You, and Z. Deng, “Synthesis of Highly Fluorescent InP/ZnS Small-Core/Thick-Shell Tetrahedral-Shaped Quantum Dots for Blue Light-Emitting Diodes,” J Mater Chem C, 5 [32] 8243-49 (2017).
21. J. Zhang, J. Wang, T. Yan, Y. Peng, D. Xu, and D. Deng, “InP/ZnSe/ZnS Quantum Dots with Strong Dual Emissions: Visible Excitonic Emission and Near-Infrared Surface Defect Emission and their Application in in vitro and in vivo Bioimaging,” J Mater Chem B, 5 [41] 8152-60 (2017).
22. J. Bang, B. Chon, N. Won, J. Nam, T. Joo, and S. Kim, “Spectral Switching of Type-II Quantum Dots by Charging,” J Phys Chem C, 113 [16] 6320-23 (2009).
23. H. Li, R. Brescia, R. Krahne, G. Bertoni, MJP. Alcocer, C. D’Andrea, F. Scotognella, F. Tassone, M. Zanella, M. De Giorgi, and L. Manna, “Blue-UV-Emitting ZnSe(Dot)/ZnS(Rod) Core/Shell Nanocrystals Prepared from CdSe/CdS Nanocrystals by Sequential Cation Exchange,” ACS Nano, 6 [2] 1637-47 (2012).
PDF Links  PDF Links
PubReader  PubReader
ePub Link  ePub Link
Full text via DOI  Full text via DOI
Download Citation  Download Citation
CrossRef TDM  CrossRef TDM
Related article
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society.                      Developed in M2PI