| Home | E-Submission | Sitemap | Login | Contact Us |  
J. Korean Ceram. Soc. > Volume 44(5); 2007 > Article
Journal of the Korean Ceramic Society 2007;44(5): 148.
doi: https://doi.org/10.4191/kcers.2007.44.5.148
Synthesis of Homogeneous La0.8Sr0.2CrO3 Powders Using an Ultrasonic Spray Pyrolysis Method
Chang-Sam Kim, Seong-Ik Hwang, Shin-Woo Kim1
Battery Research Center, Korea Institute of Science and Technology
1Department of Materials Engineering, Hoseo University
A process to synthesize $La_{0.8}Sr_{0.2}CrO_3$ (LSC), which is a promising material for use as a separator in a soild oxide fuel cell, is investigated in this study. LSC powders without secondary Phases could be synthesized with ultrasonic spray pyrolysis and a heat treatment at $1200^{circ}C$ for 20 h; however, it showed an average diameter of $0.6{mu}m$ with a wide particle size distribution. On the other hand, LSC powders synthesized with spray pyrolysis at $800^{circ}C$, heat-treated at $900^{circ}C$ for 5 h, ball-milled and finally heat-treated again at $1200^{circ}C$ for 20 h showed a smaller average diameter of $0.3{mu}m$ and narrower size distribution. Very few particles above $0.5{mu}m$ were found. Thus, a proper combination of the heat treatment and milling process after spray pyrolysis it determined to be very important in synthesizing fine and uniform LSC perovskite powders.
Key words: Solid oxide fuel cell, $La_{0.8}Sr_{0.2}CrO_3$, Separator, Ultrasonic spray pyrolysis
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society.                      Developed in M2PI