| Home | E-Submission | Sitemap | Login | Contact Us |  
J. Korean Ceram. Soc. > Volume 43(12); 2006 > Article
Journal of the Korean Ceramic Society 2006;43(12): 823.
doi: https://doi.org/10.4191/kcers.2006.43.12.823
중.저온헝 SOFC를 위한 Ni-YSZ 연료극 지지체형 단전지 미세구조와 전기적 특성
박재근, 양수용, 이태희, 오제명, 유영성, 박진우1
한국전력공사 전력연구원 전략기술연구소
1대성산업(주) 연구개발실
Microstructure and Electrical Properties of Single Cells Based on a Ni-YSZ Cermet Anode for IT-SOFCs
Jae-Keun Park, Su-Yong Yang, Tae-Hee Lee, Je-Myung Oh, Young-Sung Yoo, Jin-Woo Park1
Strategic Technology Laboratory, Korea Electric Power Research Institute
1Daesung Industrial Co., Ltd.
One of the main issues of Solid Oxide Fuel Cells (SOFCs) is to reduce the operating temperature to $750^{circ}C$ or less. It has advantages of improving the life of component parts and the long-term stability of a system, so the production cost could be decreased. In order to achieve that, the ohmic and polarization loss of a single cell should be minimized first. This paper presents.to fabricate anode-supported single cells with controlling microstructure as a function of particle size and volume of graphite and NiO-YSZ weight ratio. By means of optimizing the manufactural condition through microstructure analysis and performance evaluation, the single cell which had NiO-YSZ=6:4, graphite volume of 24% and graphite size of $75{mu}m$ as the anode composition showed a distinguished power density of $510mW/cm^2$ at $650^{circ}C$ and $810mW/cm^2$ at $700^{circ}C$, respectively.
Key words: IT-SOFCs, Ni-YSZ cermet, TPB, Internal resistance, Electrical properties
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society.                      Developed in M2PI