Journal of the Korean Ceramic Society

Journal of the Korean Ceramic Society Search

> Browse Articles > Search

Design, characterization and mechanical properties of new Na⁺, CO₃²⁻ -apatite/alginate/C₆₀ fullerene hybrid biocomposites

Nataliia Strutynska, Anna Malyshenko, Nina Tverdokhleb, Maxim Evstigneev, Ludmila Vovchenko, Yuriy Prylutskyy, Nikolai Slobodyanik, Uwe Ritter

J. Korean Ceram. Soc. 2021;58(4):422-429. Published online July 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00107-z

Fabrication and characterization of polymer-infiltrated ceramic network materials based on nano-tetragonal zirconia

Nesreen Y. Mohammed, Mohamed M. S. Wahsh, Inas T. Motawea, Hisham A. Essawy

J. Korean Ceram. Soc. 2021;58(3):359-372. Published online May 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00102-4

Alumina ceramics doped with manganese titanate via applying Mn–Ti–O coatings to corundum micropowder

Andrey M. Abyzov, Nikolai A. Khristyuk, Vladimir V. Kozlov, Fedor M. Shakhov

J. Korean Ceram. Soc. 2020;57(6):661-676. Published online November 30, 2020
DOI: https://doi.org/10.1007%2Fs43207-020-00076-3

Influence of slag on mechanical and durability properties of fly ash-based geopolymer concrete

Ramamohana Reddy Bellum, Karthikeyan Muniraj, Sri Rama Chand Madduru

J. Korean Ceram. Soc. 2020;57(5):530-545. Published online September 30, 2020
DOI: https://doi.org/10.1007/s43207-020-00056-7

Experimental investigation of strength, durability, and microstructure of red‑mud concrete

Chava Venkatesh, Ruben Nerella, Madduru Sri Rama Chand

J. Korean Ceram. Soc. 2020;57(2):167-174. Published online February 29, 2020
DOI: https://doi.org/10.1007/s43207-019-00014-y

Mineral trioxide aggregate bone cement based on wet‑prepared calcium silicate

Myung Chul Chang

J. Korean Ceram. Soc. 2020;57(1):40-55. Published online January 31, 2020
DOI: https://doi.org/10.1007/s43207-019-00005-z

Effects of Carbon Fiber on Mechanical Behaviour of Al₂O₃ Porous Ceramics

Bijay Basnet, Hyung Mi Lim, Kee Sung Lee, Ik Jin Kim

J. Korean Ceram. Soc. 2019;56(5):513-520. Published online September 23, 2019
DOI: https://doi.org/10.4191/kcers.2019.56.5.12

Cited By 2

Effect of Sintering Temperature on the Grain Size and Mechanical Properties of Al₂O₃-SiC Nanocomposites

Alireza Moradkhani, Hamidreza Baharvandi, Ali Naserifar

J. Korean Ceram. Soc. 2019;56(3):256-268. Published online May 23, 2019
DOI: https://doi.org/10.4191/kcers.2019.56.3.01

Cited By 6

Biocompatibility of 13-93 Bioactive Glass-SiC Fabric Composites

Jewon Park, Hyein Na, Sung-Churl Choi, Hyeong-Jun Kim

J. Korean Ceram. Soc. 2019;56(2):205-210. Published online March 22, 2019
DOI: https://doi.org/10.4191/kcers.2019.56.2.12

Cited By 1

Fabrication of Mullite-Bonded Porous SiC Using Ti₃AlC₂ MAX Phase

Arifin Septiadi, Dang-Hyok Yoon

J. Korean Ceram. Soc. 2019;56(2):191-196. Published online March 20, 2019
DOI: https://doi.org/10.4191/kcers.2019.56.2.11

Cited By 1

Microwave Sintering of Graphene-Nanoplatelet-Reinforced Al₂O₃-based Composites

Yunlong Ai, Ying Liu, Qiuyu Zhang, Yuxing Gong, Wen He, Jianjun Zhang

J. Korean Ceram. Soc. 2018;55(6):556-561. Published online November 20, 2018
DOI: https://doi.org/10.4191/kcers.2018.55.6.02

Cited By 1

Thermal Shock Resistance of Bilayered YSZ Thermal Barrier Coating

Dong Heon Lee, Tae Woo Kim, Kee Sung Lee, Chul Kim

J. Korean Ceram. Soc. 2018;55(5):452-460. Published online August 28, 2018
DOI: https://doi.org/10.4191/kcers.2018.55.5.04

Cited By 1

Effects of Grain Size Distribution on the Mechanical Properties of Polycrystalline Graphene

Youngho Park, Sangil Hyun

J. Korean Ceram. Soc. 2017;54(6):506-510. Published online November 29, 2017
DOI: https://doi.org/10.4191/kcers.2017.54.6.10

Cited By 5

Evaluation of Thermal Durability of Thermal Barrier Coating and Change in Mechanical Behavior

Dong Heon Lee, Nam Kyu Kang, Kee Sung Lee, Heung Soo Moon, Hyung Tae Kim, Chul Kim

J. Korean Ceram. Soc. 2017;54(4):314-322. Published online July 27, 2017
DOI: https://doi.org/10.4191/kcers.2017.54.4.05

Cited By 3

Basic Science and Classical Ceramics

Glaze Development with Application of Unity Molecular Formula

Hyunggoo No, Soomin Kim, Ungsoo Kim, Wooseok Cho

J. Korean Ceram. Soc. 2016;53(5):535-540. Published online September 30, 2016
DOI: https://doi.org/10.4191/kcers.2016.53.5.535

Cited By 1

Engineering Ceramics

The Effect of Fused Silica Crystallization on Flexural Strength and Shrinkage of Ceramic Cores for Investment Casting

Young-Hwan Kim, Jeong-Gu Yeo, Sung-Churl Choi

J. Korean Ceram. Soc. 2016;53(2):246-252. Published online March 31, 2016
DOI: https://doi.org/10.4191/kcers.2016.53.2.246

Cited By 4

Properties of Al₂O₃-SiC_w Composites Fabricated by Three Preparation Methods

Dae-Yeop Lee, Dang-Hyok Yoon

J. Korean Ceram. Soc. 2014;51(5):392
DOI: https://doi.org/10.4191/kcers.2014.51.5.392

Mechanical and Chemical Characteristics of Bottom Ash Aggregates Cold-bonded with Fly Ash

Hyeong-Ki Kim, Kyung-Ae Ha, Jeong-Gook Jang, Haeng-Ki Lee

J. Korean Ceram. Soc. 2014;51(2):57
DOI: https://doi.org/10.4191/kcers.2014.51.2.57

Cited By 4

Thermal and Mechanical Properties of ZrB₂-SiC Ceramics Fabricated by Hot Pressing with Change in Ratio of Submicron to Nano Size of SiC

Seongwon Kim, Jung-Min Chae, Sung-Min Lee, Yoon-Suk Oh, Hyung-Tae Kim

J. Korean Ceram. Soc. 2013;50(6):410
DOI: https://doi.org/10.4191/kcers.2013.50.6.410

Cited By 4

Thermal Shock Behavior of Porous Nozzles with Various Pore Sizes for Continuous Casting Process

Ju-Young Kim, Sang-Hyeon Yoon, Yoon-Ho Kim, Hee-Soo Lee

J. Korean Ceram. Soc. 2011;48(6):617
DOI: https://doi.org/10.4191/kcers.2011.48.6.617

Cited By 3

Effects of Hot Pressing Condition on the Properties of SiC_f/SiC Composites

Alfian Noviyanto, Dang-Hyok Yoon

J. Korean Ceram. Soc. 2011;48(5):335
DOI: https://doi.org/10.4191/kcers.2011.48.5.335

Cited By 3

Effect of B₄C Addition on the Microstructures and Mechanical Properties of ZrB₂-SiC Ceramics

Jung-Min Chae, Sung-Min Lee, Yoon-Suk Oh, Hyung-Tae Kim, Kyung-Ja Kim, Sahn Nahm, Seong-Won Kim

J. Korean Ceram. Soc. 2010;47(6):578
DOI: https://doi.org/10.4191/kcers.2010.47.6.578

Cited By 5

Mechanical Properties and Durability of Cement Concrete Incorporating Silica Fume

Seung-Tae Lee, Seung-Heun Lee

J. Korean Ceram. Soc. 2010;47(5):412
DOI: https://doi.org/10.4191/kcers.2010.47.5.412

Cited By 12

Wear Properties of Silicon Nitride Nano-Ceramics

Jae-Hee Kim, Venkata Manoj Kumar B, Won-Sik Kim, Seong-Hyeon Hong

J. Korean Ceram. Soc. 2009;46(5):505
DOI: https://doi.org/10.4191/kcers.2009.46.5.505

Machining Properties to Nano-Level Mirror Surface Finishing for Fine Grained WC-Co 18% Alloy using Magnetic Polishing Slurry

Tae-Soo Kwak

J. Korean Ceram. Soc. 2009;46(1):102
DOI: https://doi.org/10.4191/kcers.2009.46.1.102

Cited By 8

A Resistance Property Against High Velocity Impact on Oxynitride Glasses

Chang-Wook Kim, Hyung-Bock Lee

J. Korean Ceram. Soc. 2006;43(10):646
DOI: https://doi.org/10.4191/kcers.2006.43.10.646

Cited By 1

Mechanical Properties of AlN/hBN Ceramic Composites

Jaehyung Lee, Hyun-Wook Ahn, Young-Sik Yoon, Myeong-Woo Cho, Won-Seung Cho

J. Korean Ceram. Soc. 2005;42(8):582
DOI: https://doi.org/10.4191/kcers.2005.42.8.582

Recent Advances in Microstructural Tailoring of Silicon Nitride Ceramics and the Effects on Thermal Conductivity and Fracture Properties

Becher Paul F.

J. Korean Ceram. Soc. 2005;42(8):525
DOI: https://doi.org/10.4191/kcers.2005.42.8.525

Cited By 1

Effect of Additive Composition on Mechanical Properties of Silicon Carbide Sintered with Aluminum Nitride and Erbium Oxide

Sung-Hee Lee, Young-Wook Kim

J. Korean Ceram. Soc. 2005;42(1):16
DOI: https://doi.org/10.4191/kcers.2005.42.1.016

Cited By 2

Gas Pressure Sintering, Mechanical Properties and Microstructure of Three Binds of Si₃N₄ Ceramics

Sung-Soo Ha, Chang-Sam Kim, Deoek-Soo Cheong

J. Korean Ceram. Soc. 2004;41(10):723
DOI: https://doi.org/10.4191/kcers.2004.41.10.723

1 | 2 |