| Home | E-Submission | Sitemap | Login | Contact Us |  
top_img
J. Korean Ceram. Soc. > Volume 43(9); 2006 > Article
Journal of the Korean Ceramic Society 2006;43(9): 527.
doi: https://doi.org/10.4191/kcers.2006.43.9.527
열처리 온도에 따른 Li 도펀트 ZnO 박막형 공진기의 주파수 특성
김응권, 김용성1
성균관대학교 전자전기 및 컴퓨터공학과
1성균관대학교 정보통신용 신기능성 소재 및 공정연구센터
Frequency Characteristics of Li Doped ZnO Thin Film Resonator by Annealing Temperatures
Eung-Kwon Kim, Young-Sung Kim1
Department of Information and Communication, Sungkyunkwan University
1Advanced Material Process of Information Technology, Sungkyunkwan University
ABSTRACT
In order to study the influence of post-annealing treatment on the frequency characteristics of the Li doped ZnO(Li:ZnO) FBAR(Film Bulk Acoustic Resonator) device, we investigated the material and electrical properties of Li:ZnO films in the annealing temperature range from 300 to $500^{circ}C$. In our samples, as annealing temperature was increased, Li:ZnO films showed the improvement of high c-axis orientation and resistance value with relieved stress and low surface roughness. In addition to, the return loss in the frequency property of fabricated FBAR was improved by annealing treatment from 24.9 to 29.8dB. From experimental results, the optimum post-annealing temperature for FBAR is $500^{circ}C$ and it can obtain excellent Li:ZnO FBAR performance with stronger c-axis orientation, smoother surface, relieved stress, and lower loss factor.
Key words: FBAR, Li-doped ZnO, Annealing temperature, Return loss
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society.                      Developed in M2PI